This version is limited to 5 minutes only, please purchase the Headunit Reloaded Emulator for the full version!
How to use the app?
USB Mode
Plug in the USB to your device (in case of tablet use an OTG cable), when prompted make sure you allow HUR to be the default app for the action and you check the always box.
If you are running the app on a device with Android 7.0 or higher, you might need to pull down the notification bar and select the connected USB device before the app starts (this is device dependent)
If the app does not start automatically when you plug in your phone, you can always open HUR, tap the USB button and select the phone from the list.
Wifi Mode
Open Android Auto on the phone, go to About and tap the "About Android Auto" header 10 times to become a developer
Once you are a developer from the 3 dotted right corner select Start Headunit Server
Close Android Auto
Start tethering (from the phone)
Connect your unit device running HUR to the newly created hotspot
Start HUR
Select Wifi
Wifi Direct Mode
Open HUR, press Wifi Direct and follow on-screen instructions
Self Mode (when Android Auto and HUR are running on the same device)
Open Android Auto on the phone, go to About and tap the "About Android Auto" header 10 times to become a developer
Once you are a developer from the 3 dotted right corner select Start Headunit Server
Close Android Auto
Start HUR
Select SelfMode
FAQ / Troubleshoot
All I get is a black screen
- If you are using an Android powered headunit (Joying, Xtrons, etc) look for a setting on your device which allows Video Playback during drive
- Try changing HUR settings and enable Software decoding
HUR crashes after start
- Try changing HUR setting and disable "Media Workaround"
Compatible with: Joying, Eonon, Grom Vline, Xtrons, PX5 and PX3 units, A-Sure, RK3188 units, RK3066 units, Avin and other Android powered head units.
More FAQ, including hardware key support, intent support and others as well troubleshooting can be found: https://forum.xda-developers.com/general/paid-software/android-4-1-headunit-reloaded-android-t3432348
If you have any difficulties using the app, or you any support with it, you are always welcome to contact me.
Esta versión está limitada a 5 minutos solamente. ¡Compre el emulador Headunit Reloaded para la versión completa!
¿Cómo usar la aplicación?
Modo USB
Conecte el USB a su dispositivo (en el caso de una tableta utilice un cable OTG), cuando se le solicite, asegúrese de permitir que HUR sea la aplicación predeterminada para la acción y marque el cuadro siempre.
Si está ejecutando la aplicación en un dispositivo con Android 7.0 o superior, es posible que necesite desplegar la barra de notificaciones y seleccionar el dispositivo USB conectado antes de que se inicie la aplicación (depende del dispositivo)
Si la aplicación no se inicia automáticamente cuando conecta su teléfono, siempre puede abrir HUR, presionar el botón USB y seleccionar el teléfono de la lista.
Modo Wifi
Abre Android Auto en el teléfono, ve a Acerca de y toca el encabezado "Acerca de Android Auto" 10 veces para convertirte en desarrollador
Una vez que eres un desarrollador desde la esquina derecha de 3 puntos, selecciona Iniciar Headunit Server
Cerrar Android Auto
Iniciar anclaje (desde el teléfono)
Conecte el dispositivo de su unidad que ejecuta HUR al nuevo punto de acceso creado
Comience HUR
Seleccione Wifi
Modo directo de WiFi
Abra HUR, presione Wifi Direct y siga las instrucciones en pantalla
Modo propio (cuando Android Auto y HUR se ejecutan en el mismo dispositivo)
Abre Android Auto en el teléfono, ve a Acerca de y toca el encabezado "Acerca de Android Auto" 10 veces para convertirte en desarrollador
Una vez que eres un desarrollador desde la esquina derecha de 3 puntos, selecciona Iniciar Headunit Server
Cerrar Android Auto
Comience HUR
Seleccione SelfMode
Preguntas frecuentes / Solución de problemas
Todo lo que obtengo es una pantalla en negro
- Si está utilizando una unidad central con Android (Joying, Xtrons, etc.), busque una configuración en su dispositivo que permita la reproducción de video durante la conducción.
- Intente cambiar la configuración de HUR y habilite la decodificación de software
HUR se bloquea después del inicio
- Intente cambiar la configuración HUR y deshabilite "Media Workaround"
Compatible con: unidades Joying, Eonon, Grom Vline, Xtrons, PX5 y PX3, unidades A-Sure, RK3188, unidades RK3066, Avin y otras unidades principales con Android.
Se pueden encontrar más preguntas frecuentes, incluido el soporte de clave de hardware, soporte de intento y otros, así como la resolución de problemas: https://forum.xda-developers.com/general/paid-software/android-4-1-headunit-reloaded-android-t3432348
Si tiene alguna dificultad para utilizar la aplicación, o si tiene algún soporte, siempre puede ponerse en contacto conmigo.